series c81/c91 standard dual beam wire wrap edge-grip sockets features: ? dual beam, edge-grip contacts provide high retention with positive wiping action. ? removable cover provides lower profile. ? side-to-side stackable. specifications: ? body is black ul 94v-0 glass-filled 4/6 nylon. ? dual beam contact is grade a phosphor bronze alloy, 1/2 hard. ? contact plating: (all over 50 ? [1.27 m] nickel per sae-ams-qq-n-290) tin = 200 ? [5.08 m] min matte tin per astm b545-97. tin/lead = 50-150 ? [1.27-3.81 m] min. 90/10 tin/lead per mil-p-81728. gold = 10 ? [0.25 m] min. gold per mil-g-45204. ? contact current rating=1.5 amp. ? contact resistance=20 mohms initial. ? insulation resistance=100 mohms @ 500 vdc per mil-std-1344, method 3003.1. ? dielectric withstanding voltage=1000 vac. ? operating temperature= -67f to 221f [-55c to 105c] tin = -67f to 257f [-55c to 125c] gold ? solderability: mil-std-202, method 208 less heat aging. ? accepts leads up to .011 x .018 .003 [.28 x .46 .08] or .021 [.53] diameter. ? accepts leads .100-.200 [2.54-5.08] long with cover. mounting considerations: ?suggested pcb hole size=.046 .002 [1.17 .05] dia. no. of pins dim. ?a? dim. ?b ? centers ?c? dim. ?d ? (max) dim. ?e? 8 .465 [11.81] .300 [7.62] .300 [7.62] .400 [10.16] --- 14 .765 [19.43] .600 [15.24] .300 [7.62] .400 [10.16] .300 [7.62] 16 .865 [21.97] .700 [17.78] .300 [7.62] .400 [10.16] .400 [10.16] 18 .965 [24.51] .800 [20.32] .300 [7.62] .400 [10.16] .400 [10.16] 20 1.065 [27.05] .900 [22.86] .300 [7.62] .400 [10.16] .400 [10.16] 22 1.180 [29.97] 1.000 [25.40] .400 [10.16] .500 [12.70] .500 [12.70] 24 1.280 [32.51] 1.100 [27.94] .600 [15.24] .700 [17.78] .500 [12.70] 28 1.480 [37.59] 1.300 [33.02] .600 [15.24] .700 [17.78] .500 [12.70] 36 1.880 [47.75] 1.700 [43.18] .600 [15.24] .700 [17.78] .800 [20.32] 40 2.080 [52.83] 1.900 [48.26] .600 [15.24] .700 [17.78] .800 [20.32] cxxxx-xx tl ordering informa tion c81 series: -04=closed entry -54=open entry c91 series: -00=closed entry -50=open entry pin plating: 91=gold 81=tin socket series no. of pins (see table) a ll dimensions : inches [ millimeters ] all tolerances .005 [.13] unless otherwise specified cont act det ail 12003 rev.c printouts of this document may be out of date and should be considered uncontrolled note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. plating option: tin/lead frenchtown, nj usa tel: (908) 996-6841 fax: (908) 996-3891 http://www.arieselec.com ? info@arieselec.com abc
|
